Benjamin Moore Fresh Start® All Purpose 100% Acrylic Primer
2009年8月13日 · I have heard good things about Duration [here]. I went to the SW outlet to pick up 2 gallons and asked the guy about the specs, specifically for spraying. It is listed as a 7 mil thick wet coat, 2.8 mil dry. Holy crap, talk about thick. The Ben Moore is speced out at 2.8mil wet and 1.6 mil dry. The guy boasted how it covered better than the Ben ...
Ben Moore penetrating oil primer - Contractor Talk
2010年7月4日 · BENJAMIN MOORE® FRESH START® MOORWHITE® PENETRATING ALKYD PRIMER 100 • For best results, top coat should be applied within a reasonable length of time — preferably no more than one month after priming Technical Assistance Available through your local authorized independent Benjamin Moore & Co. retailer.
best drywall primer | Contractor Talk - Professional Construction …
2006年12月1日 · In my experience, the flat ceiling type paint is an acceptable primer. The goal of drywall primer is not to 'hide' anything but to equalize the absorption rates of the drywall and the gypsum mud and prepare the surface for the final coats of paint. The brand usually does not matter but with Benjamin Moore you won't go wrong.
Paint Comparison, Benjamin Moore, Glidden, Sherwin, Kilz
2014年11月11日 · Benjamin Moore Super Spec $22.00 Glidden Ultra Hide 770, $8.00 Glidden Ultra Hide 440, $12.75 Glidden Ultra Hide 220, $15.00 Kilz Pro X 110, $11.50 Kilz Pro X 310, $14.00 Sherwin Williams Pro Mar 200, $24.00 Dry time to the touch, for all paints was around 10 minutes in a 73 degree room. I saw no advantage for any brand as far as dry times was ...
Best Primer for mdf - Contractor Talk
2012年7月30日 · I love the zinnser products, usually use the coverstain. The ben moore fresh start, while I'm sure is a wonderful product, really takes to long to dry to keep things productive. I am an exclusive ben moore user (except primer) but ever since I used the fresh start fast dry years ago and couldn't sand it a day later I never used it again.
Spraying Benjamin Moore Advance with HVLP - Contractor Talk
2013年3月30日 · I'm about to try the Benjamin Moore Advance waterborne alkyd on some trim and cabinets. BM recommends HVLP, which is fine. Just wondering what your thoughts are on thinning and using a paint conditioner. BM recommends no more than 6% thinning, but my experience with typical latex is closer to 20-25% thinning with HVLP.
Exterior oil primer preference | Contractor Talk - Professional ...
2012年9月10日 · Benjamin Moore 100 long oil is best for raw wood as it will penetrate the wood and give a little life back to it. Not necessary to use this if the surface is sound. the 094, 024 and N024 are all good and should adhere good, but if the substrate is good and not chalky then the wb freshstart 024 or 046 would be my choice.
Paint or Solid color stain? | Contractor Talk - Professional ...
2013年4月19日 · For the longest lasting finish I'd say Benjamin Moore Fresh Start primer with two coats Aura. But it depends on your budget, a more conservative plan would be to prime with one coat Ben paint. Also, remember about 75% of a good paint job is in the prep work, not the paint.
Best primer for smooth wall? | Contractor Talk - Professional ...
2007年10月1日 · What primer would you recommend for smooth wall? I have access to Sherwin Williams, Benjamin Moore, Cloverdale, Rodda, PPG, Pittsburgh, and Kelly Moore. I will be doing flat ceilings in this house that will be sprayed and then will brush and roll the walls with a high quality low sheen paint. I want to eliminate as many imperfections as I can.
SW vs. Ben Moore vs. Kelly Moore vs. Rodda - Contractor Talk
2006年12月6日 · I like SW- A100 oil the same as BM fresh start oil I like Zinsser 1.2.3 latex primer and cover stain oil for small areas I like SW prep-rite products a lot, they've never done me wrong I like SW Duration for exterior bodies, and SW superpaint for trim I like Pittsburgh latex finish and Pro-Classic Latex for doors